HOME / PRODUCT CARE & MAIN / PRODUCT CARE & MAINTERMS AND CONDITIONS

    ARTO ACCESSORIES, SHOWERS, MIXERS

    SHOULD ONLY BE CLEANED WITH A MILD HOUSEHOLD DETERGENT OR SOAP AND WATER. IT IS IMPORTANT THAT NO ABRASIVE CLEANERS OR WAX-BASED CREAMS ARE USED AS THIS CAN RESULT IN A BUILD UP OF DEPOSITS/SCRATCHES THAT WILL DETRACT FROM THE APPEARANCE.

    ARTO BATHROOMWARE / LAUNDRY / SINKWARE

    USE A MILD HOUSEHOLD DETERGENT, WARM SOAPY WATER OR CREAM CLEANERS OR SPRAY AND WIPE AND CLEAN WITH A SOFT CLOTH.

    POLYMARBLE TOPS

    CLEAN WITH A SOFT SPONGE OR CLOTH USING A MILD SOAP OR LIQUID DETERGENT. IF CLEANERS OR COLOURING AGENTS CONTAIN CHLORINE OR PEROXIDE SOLVENTS, THESE SHOULD BE THOROUGHLY RINSED FROM THE SURFACE AFTER USE. HARD TO REMOVE STAINS CAN BE REMOVED BY USING EUCALYPTUS OIL OR METHYLATED SPIRITS. DO NOT USE ABRASIVES SUCH AS SCOURING COMPOUNDS, SCOURING PADS, STEEL WOOL OR HARSH CHEMICALS. AVOID PLACING HOT OBJECTS, SUCH AS HAIR STRAIGHTENERS, CURLING TONGS OR LIT CIGARETTES ON ANY PLASTIC SURFACE AS THESE WILL CAUSE DISCOLOURATION AND MARKING. SHOULD SLIGHT ACCIDENTAL DAMAGE OCCUR, IT MAY BE POSSIBLE TO REMOVE MARKS AS DESCRIBED FOR SCRATCHES.

    ACRYLIC TOPS

    CLEAN WITH A SOFT SPONGE OR CLOTH USING A MILD SOAP OR LIQUID DETERGENT. IF CLEANERS OR COLOURING AGENTS CONTAIN CHLORINE OR PEROSIDE SOLVENTS, THESE SHOULD BE THOROUGHTLY RINSED FROM THE SURFACE AFTER USE.
    HARD TO REMOVE STAINS CAN BE REMOVED BY USING EUCALYPTUS OIL OR METHYLATED SPIRITS.
    DO NOT USE ABRASIVES SUCH AS SCOURING COMPOUNDS, SCOURING PADS, STEEL WOOL OR HARSH CHEMICALS.
    AVOID PLACING HOT OBJECTS, SUCH AS HAIR STRAIGHTENERS, CURLING TONGS OR LIT CIGARETTES ON ANY PLASTIC SURFACE AS THESE WILL CAUSE DISCOLOURATION AND MARKING. SHOULD SLIGHT ACCIDENTAL DAMAGE OCCUR, IT MAY BE POSSIBLE TO REMOVE MARKS AS DESCRIBED FOR SCRATCHES.
    กกกก
    CABINETS - GLOSS LACQUERED (PAINTED)

    THE BEST MOTHOD OF MAINTAINING THE FINISH IS TO SIMPLY WIPE OVER WITH A CLEAN, SOFT CLOTH. IT IS IMPORTANT THAT NO ABRASIVE CLEANERS OR WAX-BASED CREAMS ARE USED AS THIS CAN RESULT IN A BUILD UP OF DEPOSITS/SCRATCHES THAT WILL DETRACT FROM THE APPEARANCE.

    SCRATCHES

    AVOID CONTACT WITH HARD, SHARP OBJECTS. SHOUD SCRATCHES OCCUR ON GLOSS LACQUERED CABINETS, FINE MARKS CAN BE REMOVED USING A CUTTING COMPOUND NORMALLY USED FOR CAR RE-TREATMENT, FOLLOWED BY BUFFING WITH A CAR POLISH AND A CLEAN SOFT CLOTH.

    CHEMICAL ATTACK

    SPILLS OF SOME PRODUCTS SUCH AS HAIR DYE, AFTER SHAVE LOTION, NAIL POLISH AND REMOVER, MINERAL TURPENTINE, WHITE SPIRIT, KEROSENE, AEROSOL PROPELLANTS AND INSECTICIDES SHOULD BE REMOVED IMMEDIATELY BY WASHING THE PRODUCT.

    STAINLESS MIXER

    CLEAN WITH SOAP & WATER OR STAINLESS STEEL CLEANER (TOWEL DRY). USE A SOFT SPONGE.
    WIPE OVER WITH A GLASS CLEANER. POLISH WITH STAINLESS POLISH.
    DO NOT USE STEEL WOOL, HARSH LIQUID CLEANERS OR BLEACH.
    BEWARE OF MINERAL DEPOSITS WITHIN WATER.